T18_3.0 - How to start ?
The product seems to be good, but instructions on how to start programming are missing. I found drivers for Window 10, but I don't know how to get the first C / C ++ Code in. Can I program it with Arduino IDE ? How to do it ? No download available.
@yakuzja Yes, this product uses the ESP32 main chip, and most of the sample programs under the Arduino ESP32 framework can be used.
@yakuzja If you want to use the OLED function, just add this library https://github.com/ThingPulse/esp8266-oled-ssd1306. There are also many sample programs. The OLED I2C pin of the product is SDA: 21, SCL: 22
I have not add:
Not go to >>> Tools >>> Board: >>> Boards Manager... and then to install esp32 by Espressif System packet. T18_3.0 20190410 ESP32-WROVER-B ESPRESSIF
@yakuzja There are two ways to get started quickly
- Use the Arduino IDE and install the ESP32 support package.
- Use the VSCODE PIO plug-in, this plug-in can automatically configure the environment for you, the compilation speed is relatively fast, and it also supports Arduino functions and libraries