How to flash T-Display-S3 AMOLED
I'm following the instructions at T-Display-S3-AMOLED github but the board is identified as a DFRobot Beetle ESP32-C3 and at step 5 where you adjust the board settings, the specs are off.
For example, flash size shows as 4MB but per the instructions should be 16MB.
CPU frequency should be 240MHz but the max in the dropdown is 160MHz.
teastain2 last edited by
Are you using Arduino IDE v2.1.0?
If so, I consider this a confusing and annoying bug in the application.
The app kindly and incorrectly identifies your board type!
You still need to type in ESP32S3 Dev Module as shown below on my computer!
Hope this helps, Terry